Invisi-Fast Hidden Deck Fasteners
Invisi-Fast
INNOVATIVE sizes of Invisi-Fast Hidden Deck Fasteners give you the flexibility you need to properly space ALL types of Decks. Sizes include 1/8", 3/16", 1/4" or no spacer allowing you to gap the deckboards.
Angle Fastener
Fasten any deck board at virtually any angle with our unique Angle fastener. The Invisi-Fast Angle Fastener uses a cylinder to space your boards so there's no angle it can't handle.
Plus Fastener
The easiest way to install deckboards from above. Our simple Flip, Attach & Flip method ensures accurate and secure attachment when used with Invisi-Fast with spacers.
Biscuit Fastener
The Invisi-Fast Biscuit Fastener fits perfectly into supported grooved deck boards or create your own groove on any solid plank with unbelievable holding power.
Invisi-Fast Original Fastener
Original Fastener for all your solid edge boards.
Available in 4 convenient spacing options.
Features
- Compatible with Composite, Hardwoods, Treated (Including the new ACQ treated lumber), Cedar, and Vinyl.
- Made of DURABLE CLEAR, UV Resistant, Lexan™ equivalent material that can be painted.
- Unique Overhang Tabs for hands free attachment.
- Boards can be easily removed if damaged.
- Exceptional holding power.
- Proper gapping with the built on spacer, creates confidence that the decking boards will not be compromised by improper spacing.
- Easy to install for the average homeowner.
- Can even be used for stair construction.
- Requires approximately 2. pieces per sq. foot of deck when joists are 12" on center.
Installation Instructions
Available Sizes
100 Pc Kit - Covers approx. 60 sq. feet.
Includes: 88 pieces with a spacer, 12 pieces without a spacer (for first & last board fastening), 300 ACQ Compatible Square Drive Deck Screws, 1 Square Driver.
500 Pc Kit - Covers approx. 300 sq. feet.
Includes: 440 pieces with a spacer, 60 pieces without a spacer (for first & last board fastening), 1500 ACQ Compatible Square Drive Deck Screws, 1 Square Driver.
- Kit with ACQ Screws
- Kit with Stainless Steel Screws
Invisi-Fast Angle Fastener
Introducing a NEW way to fasten Decking fastened on ANY Angle
Features
- Compatible with Composite, Hardwoods, Treated (Including the new ACQ treated lumber), Cedar, and Vinyl.
- Made of DURABLE CLEAR, UV Resistant, Lexan™ equivalent material that can be painted.
- Unique Overhang Tabs for hands free attachment.
- Exceptional holding power.
- Proper gapping with the built on spacer, creates confidence that the decking boards will not be compromised by improper spacing.
- Proper gapping with the built on spacer, creates confidence that the decking boards will not be compromised by improper spacing.
- Easy to install for the average homeowner.
Installation Instructions
Installation note: For a more sound deck and to prevent squeaks, we recommend applying a 3/8" bead of Silicone or Construction Adhesive along joist before installing Invisi-Fast™ hidden deck fastener to help fill in voids and imperfections on the mating surfaces between the joist and deck boards. Not applying adhesive will not compromise stability.
Available Sizes
100 Pc Kit - Covers approx. 50 sq. feet, based on 12" center.
Includes: Kit includes 88 pieces with a spacer, 12 pieces without a spacer (for first last board fastening), 300 ACQ compatible or Stainless Steel square drive deck screws, 1 Square Driver
400 Pc Kit - Covers approximately 200 square feet, based on 12" on center.
Includes: Kit includes 360 pieces with a spacer, 40 pieces without a spacer(for first and last board fastening), 1500 ACQ compatible or Stainless Steel square drive deck screws and driver.
- 100 pc Kit with ACQ Screws
- 400 pc Kit with Stainless Steel Screws
Invisi-Fast Plus Fastener
Features
- Innovative above deck fastening design.
- Compatible with Composite, Hardwoods, Treated (Including the new ACQ treated lumber), Cedar, and Vinyl.
- Made of DURABLE CLEAR, UV Resistant, Lexan™ equivalent material that can be painted.
- Convenient EDGE Alignment Mark.
- Exceptional holding power.
- Easy to install for the average homeowner.
- Must be used with Invisi-Fast™ and/or Angle Invisi-Fast™ Kits.
Advantages
- Easy to install from above
- Will not corrode like galvanized deck fasteners.
- Invisi-Fast™ fasteners cost less per square foot than most other hidden deck fastening systems.
- The Invisi-Fast™ hidden deck fastener allows for individual board replacement should a deck board ever get damaged
- No special tools needed to install.
Available Sizes
100 Pc Plus Kit - Covers approx. 50 sq. feet.
Includes: 100 pieces, 200 ACQ Compatible Square Drive Deck Screws, 1 Square Driver. Match one (1) Plus fastener per one (1) Invisi-Fast with spacer or Angle Fastener.
- Kit with ACQ Screws
- Kit with Stainless Steel Screws
Invisi-Fast Biscuit
Clear Polycarbonate Grooved Board Fastener.
Features
- Innovative above deck fastening design.
- Compatible with Composite, Hardwoods, Treated (Including the new ACQ treated lumber), Cedar, and Vinyl.
- Made of DURABLE UV Resistant, Lexan™ equivalent material that can be painted.
- Exceptional holding power.
- Easy to install for the average homeowner.
Installation Instructions
Advantages
- Easy to install from above.
- Will not corrode like galvanized deck fasteners.
- Invisi-Fast™ fasteners cost less per square foot than most other hidden deck fastening systems.
- The Invisi-Fast™ hidden deck fastener allows for individual board replacement should a deck board ever get damaged.
- No special tools needed to install.
Available Styles for Various Boards
NM-Clear, NM-Black, NMB, TXB, TT, TD, TQ, PC-1
- Invisi-Fast™ NM-CLEAR or BLACK- works with several pre-grooved boards including Monarch, Fiberon, Veranda, Latitudes, Gossen, Moisture Shield, Perennial Decking and many others. Invisi-Fast NM also works on boards with machined in grooves that are cut using a standard biscuit jointer or router.
This fastener is 1 7/8" wide. Provides 3/16" board spacing. - Invisi-Fast™ TD-CLEAR was specifically designed to work with the Tigerdeck brand grooved boards.
Provides 3/16" board spacing. - Invisi-Fast™ TT-CLEAR was designed to perfectly compliment the Timber-Tech grooved boards.
Provides 3/16" board spacing. - Invisi-Fast™ TXB-BLACK fastener is compatible with Trex's Transcends, Brasilia, Accents and Contours pre-grooved deck board. It also works with deckboards with at least 5/32" groove and would like a 1/4" spacing.
- Invisi-Fast™ TQ-CLEAR was designed to be used on 3/4" deck boards. You can choose deck board spacing of either 1/8" or 3/16". Groove dimension should be 5/32" cut 1/2" deep(minimum).
- Invisi-Fast™NMB-BLACK was designed to work with deckboards with at least an 5/32" groove.
It is 1 1/8" wide and provides a 5/32" spacing.
Available Sizes
Invisi-Fast Biscuit Kit - 100 pc
100 Invisi-Fast Biscuit Fasteners, 100- 2 1/4" trim head screws, 1 Driver bit
- Covers approx. 60 sq. feet (5.57 sq. m).
Invisi-Fast Biscuit Kit - 500 pc
500 Invisi-Fast Biscuit Fasteners, 500- 2 1/4" trim head screws, 1 Driver bit
- Covers approx. 300 sq. feet (27.87 sq. m).
Available Sizes
36 Count Start Clip Options
36- fasteners, screws, 1- Driver Bit
- Kit with Original No Spacer Option(Plastic) for under deck attachment
- Kit with steel fasteners for Trex grooved deck boards
- Kit with steel fasteners for Any decboard with 1/8" groove such as Timber-Tech, Veranda, ChoiceDeck, Moisture Shield, NyloDeck, Perrennial Wood and many more
